Demystifying Assessment Validation: How to Validate Assessments

Demystifying Assessment Validation: How to Validate Assessments

Blog Article

With registration, RTOs must juggle many responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, where validation often causes the most anxiety.

Although we've written about validation many times, let’s redefine it. ASQA refers to validation as a quality review of the assessment process.

Validation involves checking which aspects of an RTO's assessment process are accurate and identifying areas for improvement. With a solid understanding of its components, validation is less intimidating.

Clause 1.8 of the SRTOs 2015 mandates that RTOs ensure their assessment systems, including RPL, are compliant with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

According to the standards, two types of validation are necessary.

The primary validation type ensures compliance with the training package requirements for your RTO's assessments.

The next validation ensures that assessments are conducted per the principles of assessment and rules of evidence.

This implies that we validate both prior to and following the assessment. The focus of this article is on the first type: assessment tool validation.

Understanding the Two Types of Assessment Validation

Unraveling Assessment Validation

As previously discussed in our blogs, validation involves two processes: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.

In post-assessment validation, the emphasis is on implementation, ensuring that Registered Training Organisations conduct assessments as per the Principles of Assessment and Rules of Evidence.

This discussion will center around assessment tool validation.

Procedure for Assessment Tool Validation

With a grasp of the two validation types, let’s focus on assessment tool validation.

Timing for Conducting Assessment Tool Validation

The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

Thus, whenever new learning resources are purchased, you must conduct assessment tool validation before allowing student use.

There's no requirement to wait for your next 5-year cycle validation schedule. Validate new resources promptly to ensure they’re ready for students.

Still, this isn't the only reason for this type of validation. Conduct assessment tool validation when you:

- your resources get updated
- you add new training products on scope
- course is reviewed against training product updates
- your learning resources get identified as a risk during your risk assessment

ASQA's risk-based regulation approach requires RTOs to conduct regular risk assessments. Therefore, complaints from students about learning resources are a perfect time for assessment tool validation.

Which Training Products to Validate?

Remember, this type of validation is to ensure all learning resources are compliant before use. All RTOs should validate all unit resources.

Resources Needed to Start Assessment Tool Validation

Training Materials

As you validate your assessment tools, you will need the complete set of your learning resources:

Mapping tool – begin with this document. It details which assessment items correspond to unit requirements, aiding faster validation.

Learner/student workbook – check its suitability as an assessment tool during validation. Ensure instructions are clear and answer fields are sufficient. This is a common issue.

Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item exist. Clear benchmarks are crucial for reliable assessment outcomes.

Other related resources – might include checklists, registers, and templates created apart from the workbook and marking guide. Validate them to ensure they fit the assessment task and address unit requirements.

Team for Validation

Clause 1.11 outlines the requirements for validation panel members, indicating validation can be done by one or more individuals. Typically, RTOs require all trainers and assessors to attend, occasionally inviting industry experts.

Collectively, your validation panel should have:

Relevant vocational competencies and industry skills applicable to the unit being validated

Recent expertise and skills in vocational teaching and learning

One of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or its replacement

Assessment validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item more info maps against each unit requirement.
Having a validation tool helps in both the validation process and documentation. It makes it simpler to see how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It can also serve as proof that you have validated your resources before allowing students to use them.

ASQA does not provide a specific template for assessment tool validation, but numerous templates can be found online. These tools often have validators look at the tools as a whole to verify if they meet the principles of assessment.

Assessment Principles Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While templates of this kind simplify validation, they can introduce judgment errors due to a lack of space for comments on each assessment item.

It is highly recommended to use a more detailed template for inspecting each unit requirement and the assessment items that map to them. Below is an example:

Element Performance Criteria Assessment Directions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Requires Checking?

As noted in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.

Key Principles of Assessment
Fairness – Are equal opportunities and access ensured in the assessment process?

Flexibility – Does the assessment offer multiple ways to show competence according to different needs and preferences?

Validity – Is the assessment testing what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment produce consistent results every time, regardless of who conducts the training? Will different assessors make the same decision on skill competence?

Evidence Rules

Validity – Does the evidence indicate that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool verifying that the work is the candidate’s own?

Currency – Do the assessment tools reflect current units of competency and modern industry practices?

Although these are regularly covered in VET professional development and nationally recognised training, numerous tools still struggle to meet these requirements.

To prevent using learning resources that fail to address some unit requirements, ensure you follow these guidelines:

Demonstrate What You Teach

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Complete each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

diapering

bottle preparation, feeding infants from bottles, and cleaning equipment

prepare solid food and feed infants

respond properly to infant signs and cues

prepare babies for sleep and settle them

monitor and support age-appropriate physical exploration and gross motor skills

Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Be Mindful of Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.

Complete or Not Competent

Mind the lists. In the previous example, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be More Specific?

Each assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Hence, ensure your instructions are clear and not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What kind of information can be included in a work package?

Answers can include:

Needed resources

Applicable expenses

Length of activities

Allocated duties and responsibilities

When an assessment item requires multiple answers, indicate the number of answers needed from a student. This way, your assessment is reliable, and the evidence collected is valid.

The same applies to assessment items with double-barrelled questions or those that ask for multiple answers simultaneously. Such questions can confuse both students and assessors, as illustrated in the example below:

Name a hazard and/or environmental issue in the work area and choose the most effective hazard control hierarchy.

Answers may include, but are not necessarily limited to:

Weather conditions – isolation of the work area, engineering, personal protective equipment

Work area and ground conditions – eliminating hazards, isolating, engineering

People – isolation, use of engineering controls, administrative controls

Structural hazards – substitution, isolation, engineering

Chemical hazards – isolating, use of engineering controls, administration

Equipment or machinery – isolating, engineering, administration

Avoiding double-barrelled questions makes it easier for students to respond and for assessors to accurately judge student competence.

Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” But such guarantees mean you must wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s wiser to take the safe and compliant route.